[SR-Users] problem with siptrace outgoing SIP message logging

[Peter Kaszas]

Dear List members,

Im quite new to kamailio, and i got a problem with the siptrace module. I
read that siptrace module can capture and log all incoming and outgoing sip
messages.

So i put to the config file the following lines:

loadmodule "siptrace.so"
.
.
.
#-------- siptrace paramas -----
modparam("siptrace", "db_url", DBURL)
modparam("siptrace", "table", "sip_trace")
modparam("siptrace", "trace_flag", 18)
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "trace_sl_acks", 1)

.
.
. route {
sip_trace();

.......
}


Now I can capture all incoming SIP messages, but I none of the outgoing.

Where can I put the sip_trace(); command to capture also the outgoing
messages?

Thank you,

Peter

[Timo Klecker]

Hey,



we use the following:



modparam("siptrace", "trace_flag", 22)

[..]

route {

[..]

# set the Flag for siptrace to log the messages in tm module

setflag(22);



# handle requests within SIP dialogs

route(WITHINDLG);



### only initial requests (no To tag)

[..]

# With setflag(22) the first Message is not traced. Trace it
here

sip_trace();

[..]





This works fine when you do not use forward().



Kind regards

Timo Klecker







Von: sr-users-***@lists.sip-router.org
[mailto:sr-users-***@lists.sip-router.org] Im Auftrag von Peter Kaszas
Gesendet: Donnerstag, 28. Juli 2011 22:28
An: sr-***@lists.sip-router.org
Betreff: [SR-Users] problem with siptrace outgoing SIP message logging



Dear List members,

Im quite new to kamailio, and i got a problem with the siptrace module. I
read that siptrace module can capture and log all incoming and outgoing sip
messages.

So i put to the config file the following lines:

loadmodule "siptrace.so"
.
.
.
#-------- siptrace paramas -----
modparam("siptrace", "db_url", DBURL)
modparam("siptrace", "table", "sip_trace")
modparam("siptrace", "trace_flag", 18)
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "trace_sl_acks", 1)

.
.
. route {
sip_trace();

.......
}


Now I can capture all incoming SIP messages, but I none of the outgoing.

Where can I put the sip_trace(); command to capture also the outgoing
messages?

Thank you,

Peter

[Peter Kaszas]

Hello Timo,

Thank you for your reply. It works!

Regrads,

Peter

Hey,****
** **
we use the following:****
** **
modparam("siptrace", "trace_flag", 22)****
[..]****
route {****
[..]****
# set the Flag for siptrace to log the messages in tm
module****
setflag(22);****
** **
# handle requests within SIP dialogs****
route(WITHINDLG);****
** **
### only initial requests (no To tag)****
[..]****
# With setflag(22) the first Message is not traced. Trace
it here****
sip_trace();****
[..]****
** **
** **
This works fine when you do not use forward().****
** **
Kind regards****
Timo Klecker ****
* *
* *
** **
*Gesendet:* Donnerstag, 28. Juli 2011 22:28
*Betreff:* [SR-Users] problem with siptrace outgoing SIP message logging**
**
** **
Dear List members,
Im quite new to kamailio, and i got a problem with the siptrace module. I
read that siptrace module can capture and log all incoming and outgoing sip
messages.
loadmodule "siptrace.so"
.
.
.
#-------- siptrace paramas -----
modparam("siptrace", "db_url", DBURL)
modparam("siptrace", "table", "sip_trace")
modparam("siptrace", "trace_flag", 18)
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "trace_sl_acks", 1)
.
.
. route {
sip_trace();
.......
}
Now I can capture all incoming SIP messages, but I none of the outgoing.
Where can I put the sip_trace(); command to capture also the outgoing
messages?
Thank you,
Peter****
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

[Timo Klecker]

Hello Peter,



when you use the default kamailio cfg there will be one BYE missing.



[..]

# Handle requests within SIP dialogs

route[WITHINDLG] {

if (has_totag()) {

# sequential request withing a dialog should

# take the path determined by record-routing

if (loose_route()) {

if (is_method("BYE")) {


setflag(FLT_ACC); # do accounting ...


setflag(FLT_ACCFAILED); # ... even if the transaction fails

sip_trace();

}

route(RELAY);



[..]



Kind regards

Timo Klecker







Von: sr-users-***@lists.sip-router.org
[mailto:sr-users-***@lists.sip-router.org] Im Auftrag von Peter Kaszas
Gesendet: Freitag, 29. Juli 2011 10:09
An: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users
Mailing List
Betreff: Re: [SR-Users] problem with siptrace outgoing SIP message logging



Hello Timo,

Thank you for your reply. It works!

Regrads,

Peter

On 29 July 2011 08:33, Timo Klecker <***@decoit.de> wrote:

Hey,



we use the following:



modparam("siptrace", "trace_flag", 22)

[..]

route {

[..]

# set the Flag for siptrace to log the messages in tm module

setflag(22);



# handle requests within SIP dialogs

route(WITHINDLG);



### only initial requests (no To tag)

[..]

# With setflag(22) the first Message is not traced. Trace it
here

sip_trace();

[..]





This works fine when you do not use forward().



Kind regards

Timo Klecker







Von: sr-users-***@lists.sip-router.org
[mailto:sr-users-***@lists.sip-router.org] Im Auftrag von Peter Kaszas
Gesendet: Donnerstag, 28. Juli 2011 22:28
An: sr-***@lists.sip-router.org
Betreff: [SR-Users] problem with siptrace outgoing SIP message logging



Dear List members,

Im quite new to kamailio, and i got a problem with the siptrace module. I
read that siptrace module can capture and log all incoming and outgoing sip
messages.

So i put to the config file the following lines:

loadmodule "siptrace.so"
.
.
.
#-------- siptrace paramas -----
modparam("siptrace", "db_url", DBURL)
modparam("siptrace", "table", "sip_trace")
modparam("siptrace", "trace_flag", 18)
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "trace_sl_acks", 1)

.
.
. route {
sip_trace();

.......
}


Now I can capture all incoming SIP messages, but I none of the outgoing.

Where can I put the sip_trace(); command to capture also the outgoing
messages?

Thank you,

Peter